Walli N Line

Description

Walli N is a line of non-intelligent FIBARO sockets. The Walli N line consists of sockets:

Walli N Ethernet Outlet
(FGWEEU-021)
Walli N TV-SAT
(FGWTFEU-021)
Walli N USB Outlet
(FGWU-021)

Back To Top

Walli N Ethernet Outlet

Warnings

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law.

Do not connect devices which are not compliant with the specification or relevant safety standards.

Do not expose this product to moisture, water or other liquids. Do not use in bathrooms and other high humidity rooms.

This product is designed for indoor use only. Do not use outside!

This product is not a toy. Keep away from children and animals!

Back To Top

Specifications

For installation in boxes Ø = 60mm, depth ≥ 40mm

Back To Top

Basic activation of the device

  1. Take off the cover of the terminals.
  2. Strip 40mm of the sheath from the cable.
  3. Place wires in terminals according to colour markings and push them using punch down tool.
  4. Cut off excess wires.
  5. Snap the cover of the terminals.
  6. Take off the front covers.
  7. Insert the device with the mounting frame into the mounting box and secure it with mounting claws and screws.
  8. Snap the covers back.

Back To Top

Walli N TV-SAT

Warnings

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law.

Do not connect devices which are not compliant with the specification or relevant safety standards.

Do not expose this product to moisture, water or other liquids. Do not use in bathrooms and other high humidity rooms.

This product is designed for indoor use only. Do not use outside!

This product is not a toy. Keep away from children and animals!

Back To Top

Specifications

For installation in boxes Ø = 60mm, depth ≥ 40mm

Back To Top

Basic activation of the device

  1. Take off the front covers.
  2. Unscrew and open the back flap.
  3. Expose the core (approx. 7mm) and braiding (approx. 17mm) of the cables.
  4. Insert the cables into terminal box. Core should enter between the blades (diagram A).
  5. Close and screw back the flap.
  6. Insert the device with the mounting frame into the mounting box and secure it with mounting claws and screws.
  7. Snap the covers back.

Back To Top

Walli N USB Outlet

Warnings

Failure to observe recommendations included in this manual may be dangerous or cause a violation of the law.

The device is designed to operate in home electrical installation. Faulty connection or use may result in fire or electric shock.

All works on the device may be performed only by a qualified and licensed electrician. Observe national regulations.

Any maintenance introducing changes into the configuration of connections must be always performed with disconnected voltage (disable the fuse).

Do not connect devices which are not compliant with the specification or relevant safety standards.

Do not expose this product to moisture, water or other liquids. Do not use in bathrooms and other high humidity rooms.

This product is designed for indoor use only. Do not use outside!

This product is not a toy. Keep away from children and animals!

Back To Top

Specifications

Power supply 110-230V~ 50/60 Hz
Outputs 2x USB type A 5V, max. 2.4A total
Operating temperature 0–40°C
Ambient humidity  0–90% RH without condensation
For installation in boxes Ø = 60mm, depth ≥ 40mm

Back To Top

Basic activation of the device

  1. Take off the front covers.
  2. Remove 9-10.5mm of insulation from wires.
  3. Connect live wire to L terminal and neutral wire to N terminal.
  4. Insert the device with the mounting frame into the mounting box and secure it with mounting claws and screws.
  5. Snap the covers back.

Back To Top