There are few options to take into consideration:
- Reduce the frequency of waking up the device using advanced parameter (choose longer intervals).
- Reduce the frequency of reporting measurements (like temperature, humidity, etc.) to the gateway using advanced parameters (choose longer intervals).
- Make sure the device is in range – when loosing range device may try to reconnect to controller frequently, draining the battery.
- Make sure the device is added in proper powering mode.
- Update firmware of the device.
- Reduce the number of associations.
- Reduce the number of activated scenes (like double click, tripple click, etc.) using advanced parameters.
April 20, 2017 2413 Questions
Total 5 Votes: