Wall Plug (FGBWHWPEF-102)

The Wall Plug can turn ON/OFF connected electrical device either through iOS mobile app or button.

The Wall Plug measures the currently active power consumption of the connected device and reports it to your iOS device. The measured value is indicated with a color of the LED ring.

The Wall Plug counts energy consumed by connected device and reports accumulated value to your iOS device.

The Wall Plug detects if any device is plugged into it and reports it to your iOS device.

Now it is possible to manage Wall Plug with Amazon Alexa!

1. Open FIBARO for HomeKit Devices app.
2. Log in using FIBARO ID.
3. Add Wall Plug to HomeKit Devices app.
4. Click register button in a pop-up window to register the Wall Plug.
5. Log in to Amazon Alexa app.
6. Enable FIBARO Smart Home Skill. Make sure you use the same FIBARO ID as you used to log in to FIBARO for HomeKit Devices app.

If you didn't register your device while adding, go to the Fibaro Cloud in settings section and click "Pair unregistered devices" button.

More about Amazon Alexa:
FIBARO smart home skill and custom skill in Amazon Alexa
Amazon Alexa frequently asked questions
FIBARO skills in Amazon Alexa

The Wall Plug can be operated using the built-in menu. To enter and navigate the menu:

1. Press and hold the button.
2. Release the button, when the LED ring glows with desired color:
• VIOLET - Wi-Fi range test
• RED - reset Wi-Fi settings
• GREEN - reset energy counter
• YELLOW - factory reset
3. Immediately click the button

The LED ring of the Wall Plug glows when the device is turned ON and displays current active power consumption.
Colors depending on the measured value:

• 0W - white
• 100W - blue
• 200W - green
• 400W - yellow
• 1000W - orange
• 1800W - red
• 2300W - violet

Additionally LED ring allows navigating the built-in menu.

Use app that allows to configure parameters to adjust operation of Wall Plug.

1. Color of LED ring
This parameter allows to choose color of LED ring when device is ON.
Default setting: 1 (color dependent on measured active power with smooth transition between colors)
Available settings:
0 – color dependent on measured active power
1 - color dependent on active power measurements with smooth transition between colors
2 - white
3 - red
4 - green
5 - blue
6 - yellow
7 - cyan
8 - magenta
9 - LED ring disabled

2. Measured power for blue LED ring color
This parameter allows to set power value for blue backlight of LED ring.
Default setting: 100 W
Available settings: 0 - 2500W – color dependent on measured active power

3. Measured power for green LED ring color
This parameter allows to set power value for green backlight of LED ring.
Default setting: 100 W
Available settings: 0 - 2500W – color dependent on measured active power

4. Measured power for yellow LED ring color
This parameter allows to set power value for yellow backlight of LED ring.
Default setting: 100 W
Available settings: 0 - 2500W – color dependent on measured active power

5. Measured power for orange LED ring color
This parameter allows to set power value for orange backlight of LED ring.
Default setting: 100 W
Available settings: 0 - 2500W – color dependent on measured active power

6. Measured power for red LED ring color
This parameter allows to set power value for red backlight of LED ring.
Default setting: 100 W
Available settings: 0 - 2500W – color dependent on measured active power

7. Measured power for violet LED ring color
This parameter allows to set power value for violet backlight of LED ring.
Default setting: 100 W
Available settings: 0 - 2500W – color dependent on measured active power

Power supply:	230V AC, 50 Hz
Rated load current:	10A - continuous load
Power output (for resistive load):	2300W - continuous load
To be used with E or F type (Schuko) sockets:	- CEE 7/16 - max load 2.5A - CEE 7/17 - max load 10A - Dual type plugs E/F
EU directives compliance:	RED 2014/53/EU RoHS 2011/65/EU
Pollution Degree:	2 (home and office use, indoor only)
Radio protocol:	IEEE 802.11n Bluetooth® low energy
Radio frequency:	2.4 GHz
Radio transmit power (EIRP):	up to 15 dBm (Wi-Fi) up to 9.2 dBm (BLE)
Operating temperature:	0-40°C (32-104°F)
Temperature measuring range:	0-40°C (32-104°F)
Dimensions (diameter x height):	43 x 65 mm (1.7" x 2.56")

Safety classification rating: home and office use only

Type 1 action according to features of automatic action as per clause 6.4.1 of EN 60730-1:2012 standard.
Software class A device, according to EN 60730-1:2012 standard.

• To control this HomeKit-enabled accessory, iOS 10 or later is recommended.
• Controlling this HomeKit-enabled accessory automatically and away from home requires an Apple TV with tvOS 10 or later or an iPad with iOS 10 or later set up as a home hub.

All information, including, but not limited to, information regarding the features, functionality, and/or other product specification are subject to change without notice. Fibaro reserves all rights to revise or update its products, software, or documentation without any obligation to notify any individual or entity.

FIBARO and Fibar Group logo are trademarks of Fibar Group S.A. Apple, iPhone, iPad, iPad Air, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries. HomeKit is a trademark of Apple Inc.

Wi-Fi is a registered trademark of Wi-Fi Alliance.

The Bluetooth word mark is registered trademark of Bluetooth SIG, Inc.

All other brands and product names referred to herein are trademarks of their respective holders.

Use of the Works with Apple HomeKit logo means that an electronic accessory has been designed to connect specifically to iPod touch, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards.

Device labelled with this symbol should not be disposed with other household wastes. It shall be handed over to the applicable collection point for the recycling of waste electrical and electronic equipment.

Hereby, Fibar Group S.A. declares that FIBARO Wall Plug is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU.